What Causes Uneven Heating In Your House

Person holding a big letter X to show what causes uneven heating in your house

Despite increasing your heater’s temperature several times to avert cold out of your home, you may still notice your house not getting warm enough. Uneven heating in house van be caused by a variety of problems. So what causes uneven heating in your house and how should you solve this?

Common causes of uneven heating problems in homes

Have you noticed no heat in one zone of house and some heat in another zone around your house? Here are the common causes of uneven heating problems in homes.

  1. Undersized boiler. Your boiler could be smaller for radiators in your house. This is a common problem in newer houses. House constructors tend to install the exact boiler capacity needed. Since installation already occurred, you may have extended or changed the radiators to double panels from single in order to have more heat around your house. If it can’t handle it, uneven heating in the house could occur.
  2. Your radiators are dirty. This is another major cause of no heat in one zone of house. Your radiators could be sledged up. So how could you tell?  Observe if the radiators are only warming up at the top. This means they’re operating at half-power.
  3. There’s a blockage or restriction in your pipework. Sledge can block or restrict your pipework. If the sludge finds its way into your manifolds or valves, how water that flows to the radiators will be blocked.
  4. Your boiler's thermostat is faulty. This is another common cause of uneven heating at home. The thermostat might be opening and closing earlier and not noticing the right temperature it ought to be.
  5. Malfunctioning heat pump. You may notice your Heat Pump Being Ineffective at opening up. It could open up partially or not pump at the right normal speed. This means heat isn’t reaching your radiators hence the reason for a cold room.

Best solutions to what cause uneven heating in house

If you aren’t sure of the cause of the problem, there are solutions you can try out yourself. For example, when your furnace is on, inspect your radiators and see if the whole of it is hot. Also set your controls to the maximum level and inspect whether the radiators are extremely too hot for you to touch them.

Never ignore any problem you observe with your heater. The causes shared above will better help you troubleshoot the issue and enable you to efficiently address it to a HVAC specialist before inspection. Need a HVAC specialist to help you out with heating in Atlanta? Contact Moncrief Heating & Air Conditioning today and schedule a consultation!